| Input voltage |
5 VDC ± 0.25V |
| Length |
164 mm |
| Programming method |
Manual (Reading special barcodes) DOS command through RS-232C, Windows configuration program |
| Light source |
630nm Visible Red LED |
| Width-handle |
30 mm |
| Power - operating |
900 mW |
| Optical system |
2048 pixel CCD (Charge-coupled device) |
| Storage |
-20°C; to 70°C; (-4°F; to 158°F;) (battery not included for 2850) |
| Program upgrade |
Enabled by built-in flash memory |
| Depth of scan field |
0-600 mm ( Code 39 , PCS=90%, 20mil) |
| Width-head |
78 mm |
| Power - standby |
150 mW |
| Programmable characteristics |
Code type selection, check digit selection, Decoding option, Transmitted character delay, header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language) Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits) Cordless type (special cordless transmission character settings for 2850) |
| Humidity |
10% to 90% relative humidity, non-condensing |
| Light level |
Up to 70000 lux |
| Current - operating |
225 mA @ 4.2 VDC |
| Scanning width |
160mm |
| Depth-handle |
56 mm |
| Depth-head |
35 mm |
| Shock |
1.5m drop onto concrete (90cm for 2850 cradle) |
| Current - standby |
32 mA @ 4.2 VDC |
| Scan speed |
450 scan/sec |
| Operating Temperature |
0°C to 50°C (32°F to 122°F) |
| Resolution |
0.1mm (4mil) Code 39 , PCS=90%, on contact |
| Weight |
250g (battery included) |
| Agency Listing |
UL, FCC Class B, CE, BSMI |
| Print contrast |
30% or more |
| Scanning angle |
Front: 60° Rear: 60° Yaw: 75° |
| Decode capability |
Autodiscriminates all standard barcodes; Other symbologies can be ordered optionally |
| Beeper operation |
7 tones or no beep |
| Connector type |
RJ-45 phone jack connector |
| Indicator |
Green & Red Led (2 more LED for 2850 cradle) |
| Case material |
ABS plastic (over molded at contact pointed) |
